The mobile test bench SVM 4/100 is specifically designed for testing valves with DIN and ASA flanges up to a nominal diameter of DN 100 / 4". The test specimen is clamped using two adjustable clamping claws, which can be height-adjusted depending on the flange size. The clamping force is typically applied manually by tightening the clamping screws. If additional sealing force is required, the clamping force can be increased using a tool on the hexagonal head of each screw.

The test medium used is pressurized gas supplied from external gas cylinders or compressors. The test pressure is regulated using precision needle valves located on the valve head. The pressure at the valve head is displayed on a primary pressure gauge (M2) integrated into the front panel.

The test pressure gauge is connected via Metrus manometer quick connectt fittings  located at the top of the control panel. These parallel connectors allow the simultaneous use of a pressure sensor or comparison gauge in addition to the standard test pressure gauge.

A bubble tester is mounted on the side of the control panel, which is connected to the valve outlet via an air hose and a rubber plug. This system ensures precise leak detection and facilitates reliable valve testing.

Figure may contain options.

Max. Test pressure

The Metrus SVM 4/100 E is our smart solution for versatile testing requirements. It is based on a safety valve test bench, but in this case, it has been configured as a mobile version built on one of our smallest test benches, the SVM 4/100.

The use of the removable top beam not only enables the standard safety valve test but also allows for seat leakage testing with low-pressure air on shut-off or control valves. Additionally, the optional shell test with water can be performed. The top beam can be mounted or dismounted in less than 3 minutes, offering maximum flexibility.

This mobile solution is perfectly suited for the testing of valves and fittings up to DN100, providing an efficient and compact way to meet a variety of testing needs.

Figure may contain options.

Max. Test pressure

The mobile test bench SVM 4/250 is specifically designed for testing valves with DIN and ASA flanges up to a nominal diameter of DN 250 / 10". The valve to be tested is secured to the clamping point using two adjustable clamping claws, which can be adjusted in height to accommodate various flange sizes.

The clamping force is typically applied by manually tightening the clamping screws. If additional sealing force is required, each clamping screw features a hexagon, allowing the force to be increased using a tool if necessary.

Compressed gases from external gas cylinders or compressors can be used as the test medium. The test pressure is regulated via specially developed METRUS precision needle valves V30.2 on the 2-way valve head. The pressure at the valve head is displayed on an inlet pressure gauge (M1) located on the front panel.

Test pressure gauges are connected via two parallel quick connectors (G½") on the top of the control cabinet. These parallel connections allow the use of a pressure sensor or a comparison gauge in addition to the main test pressure gauge.

A bubble counter is mounted on the right side of the control cabinet, which connects to the outlet of the valve via an air hose and rubber stopper. Operation is performed using the precision needle valves, with the required test pressure adjusted at the pressure inlet valve and displayed on the test pressure gauge on the control panel.

Figure may contain options.

Max. Test pressure

The safety valve test benches of the METRUS SVM series are specifically designed for mobile use. The SVM 20 is perfectly suited for mobile workshops or as a terminal connected to a central pressure supply for several test benches.

Our models SVM 20/200 and SVM 20/400 are also available as WEB-EDITION. With basic equipment, the delivery time is only 4 weeks.

Figure may contain options.

Max. Test pressure

The safety valve test benches of the METRUS SVM series are specifically designed for mobile use. The SVM 20 is perfectly suited for mobile workshops or as a terminal connected to a central pressure supply for several test benches.

Our models SVM 20/200 and SVM 20/400 are also available as WEB-EDITION. With this basic equipment, the delivery time is only 4 weeks.

Figure may contain options.

Max. Test pressure

The safety valve test benches of the METRUS SVM series are specifically designed for mobile use. The SVM 20 is perfectly suited for mobile workshops or as a terminal connected to a central pressure supply for several test benches.

Our models SVM 20/200 and SVM 20/400 are also available as WEB-EDITION. With basic equipment, the delivery time is only 4 weeks.

Figure may contain options.

Max. Test pressure

The safety valve test benches of the METRUS SVM series are specifically designed for mobile use. The SVM 20 is perfectly suited for mobile workshops or as a terminal connected to a central pressure supply for several test benches.

Our models SVM 20/200 and SVM 20/400 are also available as WEB-EDITION. With basic equipment, the delivery time is only 4 weeks.

Figure may contain options.

Max. Test pressure